PCF25PGTB GE Refrigerator Parts List

Evaporator fan grommet - grey (grommet evap fan)

This is a replacement evaporator fan grommet for your refrigerator. The fan grommet absorbs the vibration from the evaporator fan motor for quiet operation while it runs. If your evaporator fan is unusually noisy, it could be because the grommet is damaged. This grommet is made of grey plastic and is approximately one inch in diameter. To access the fan grommet and complete this repair, you will need to remove the evaporator fan motor assembly. This part is sold individually.

Dc condenser fan motor - 12v (motor dc cond fan)

This fan motor circulates the air through the refrigerator grille and cools the compressor and condenser coils. It also helps to evaporate extra water in the drain pan.

Mwf bypass (cap, water filter bypass)

This part is a replacement filter bypass cap for your refrigerator. If you intend to use an external water filtration system for your refrigerator, the bypass cap will allow you to do so. To use a filter bypass cap, simply screw it in where you would normally screw in the regular water filter. If you have a bypass system installed and your ice maker doesn’t make ice, your water dispenser doesn’t make water, or if there is water dripping inside your refrigerator, you may need to replace the bypass filter cap. This part is made of white plastic and is sold individually.

Humidity control - white (humidity control)

This part regulates the humidity of your crisper bins. It does so by opening and closing vents on the bin. If your humidity control is broken or missing, you will need to replace it. This is a genuine OEM part from GE and is sourced directly from the manufacturer.

Ice bucket and auger assembly (bucket and auger asm)

This assembly includes the auger, bucket, cutting assembly (blades) and cover.

Ice dispenser solenoid service kit (solenoid & arm asm)

This kit includes 1 cube solenoid, 1 armature, 2 tooth washers and 2 1/4 hex head screws.

Screw - 12-24 tt ovt .900 s (scr 12-24 tt ovt .900 s)

Sold individually.

Micro switch (switch)

This is the replacement micro switch, or dispenser switch for your refrigerator. It is gray in color and measures approximately 1 inch by half an inch. The dispenser switch is what tells your refrigerator that it is ok to dispense ice or water. If your refrigerator is not dispensing ice or water, you may have a faulty or damaged switch. Be sure to disconnect the power to your refrigerator before you begin this repair. This switch is sold individually and is a genuine OEM replacement part sourced directly from the manufacturer.

Evaporator drip pan (trough drain asm)

This is the replacement evaporator drip pan, also known as the drain trough, for your refrigerator. You will find the drip pan in the fresh food section of the refrigerator. It collects any water that may drip off the evaporator. If your drip pan is rusted, or is leaking into the refrigerator, you may need to replace it. Before you install the new drip pan, you will want to thoroughly clean the areas around the evaporator to ensure there is no more remaining rust or debris. This part is sold individually and is an OEM part sourced directly from the manufacturer.

Grommet / tube assembly (icemaker fill tube assembly)

This is a replacement fill tube and grommet assembly for your refrigerator. This part acts your water line to your ice maker. If you’re noticing water in the back of the refrigerator or any kind of leak, or if your ice bucket isn’t filling up with as much ice, you may need to change out the fill tube and grommet assembly. When you purchase this part, you get the water line, as well as the fill tube and grommet. This is an OEM part sourced directly from the manufacturer.

Armature kit (shroud solenoid)

Housing crusher dispenser (housing crusher disp)

Screw

Size: 10-32 GXTT FLP .595 Sold individually.

Middle chiller drawer (pan middle chill asm)

This part is the replacement middle chiller drawer for your refrigerator. It is made of clear plastic, with a white plastic front frame, and is approximately 16 inches deep, 21 inches wide, and 13 inches tall. The chiller drawer rests in the middle of your refrigerator, and slides in and out to allow you to store items. The main reason to replace this part is if the old drawer is cracked, broken, or missing. To replace the drawer, simply remove the old drawer and replace it with the new one. This is an OEM part and is sold individually.

Shelf support (support shelf)

Sold individually.